Shine On LED
Custom LEDs designed and delivered.

Portfolio

While our custom projects have been primarily located in the Bay Area, we welcome all clients to contact us for customized lighting solutions. Our residential LED lighting projects include both permanent and portable plug-in fixtures. Permanent lighting applications for residential include elevators, garages, bedrooms, offices, custom hanging pendant lights, wine racks, linear ceiling lights, under cabinet lighting, closets and outdoor environs (decks and hot tub areas). Portable plug-in fixtures for residential projects include artistic installations and meditation walls.

Hyde Street Loft #2

This San Francisco loft has 24 volt LEDs installed behind the ceiling support girders, with Lutron Homeworks lighting controls for custom dimming. The kitchen installation is wired with two lighting options, allowing the fixture to be switched between warm white Cree spotlights, pure white LED bars, or both at once. All of these LEDs can also be dimmed with a Lutron control. All rigid bar LEDs used have 18 LEDs per linear foot.

Vortex

This elegant San Francisco loft is outfitted with custom designed extrusions and diffusers and 24 volt LEDs. Lutron Homeworks lighting controls are used throughout the installation. Lighting in each room can be dimmed with a separate Lutron switch. All rigid bar LEDs used have 24 LEDs per linear foot. 

Greenwich Residence

This Greenwich Street residence is illuminated with RGB LEDS on each of its four floors, elevator, garage, man cave, master bedroom, office, and fourth floor deck and hot tub area. The fourth floor is elegantly lit with 24 Volt RGB digital LEDs, custom made by Shine On LED. With a grand view of the Golden Gate Bridge, the RGB LEDs can match the mood or slowly fade between 16,000 colors.

LED Spiral Chandelier

Working directly with Kyle Minor Design, Shine On LED designed, modeled, rendered and installed LED lighting into this LED spiral aluminum frame with wood veneer. The chandelier has over 135 feet of Warm and Pure White LEDs mounted on the inside and controlled with a Lutron wall dimmer.

The 10 foot by 12 foot chandelier was modeled in 3D and cut with a water-jet machine. All the parts were welded together and designed to come apart for transportation. Wood veneer was used to wrap the entire piece and to provide a warm glow from the LEDs on the inside.

Linear Kitchen LED Lights

Working directly with Kyle Minor Design, Shine On LED designed, modeled, and rendered this 16.5 foot LED fixture and provided all the necessary LED components. The lights illuminate the kitchen area with warm LED light mounted on the inside corners of the fixture and are controlled with a Lutron wall dimmer.

The fixture was modeled in 3D and cut with a water-jet machine. The side surfaces were made of custom cut 3FORM from samples picked by our client. The 3FORM gives color and a warm glow to the space.

LED Wine Rose Rack

Working directly with Kyle Minor Design, Shine On LED provided the LEDs, plug-in power supply and installation.

Shine On LED has LEDs available in many shades of white. A warm rose LED color was what the client called for and clearly helps show off the wine bottles, wood grain and color with zero UV light.

Each of the LED strips are mounted to the back aluminum structure with 3M LED heat dissipation tape. A 60 watt DC lug-in type power supply is used to power the LED system and has a pushbutton on/off switch. The Warm White LEDs are attached to the back of the aluminum inner structure. facing backwards and reflecting the warm LED.

Marina Residence

This San Francisco ‘Green’ home is illuminated with LED lighting using all UL listed LED components. Powered by 12 and 24 Volt DC power, this house has LEDs in the kitchens, bathrooms, under cabinets, garage, closets and outdoors.

Wavewall Experience

This massive dynamic RGB LED 4 foot by 8 foot wavewall was custom designed by Shine On LED to deliver a truly unique LED experience. Rigid LED boards were designed to be offset from the shape of the winding wave-like wall.

This bending ‘wave-shaped’ RGB LED wall is fully programmable and diffused with a molded 3-form screen. Each LED has a separate IP address so the wall can breath LED light up, down, backwards, forwards in any combination imaginable. The client and Shine On LED developed 12 unique light shows that can be operated with the Traxon Glass Touch T12.

Chakra RGB Wall

This colorful, dynamic 3 by 3 foot meditation wall was custom designed by Shine On LED and Marilynne Moreshead to deliver a truly unique experience. Rigid RGB LED boards were designed to be opened to slide in artwork, and so the light would shine through the translucent material for a special glow.

This installation is fully programmable and can be adjusted from the wall unit or by plugging in your laptop. Each LED has a separate IP address so the wall can breathe LED light up, down, backwards, and forwards in any combination imaginable. The client and Shine On LED developed eight unique light shows that can be updated with Easy Stand Alone (ESA) software.

LED San Francisco Loft

This residence is illuminated with RGB LEDS on the back wall, white LEDs under the cabinets and 6 inch CREE LED cans in the ceiling.

This 800 square foot San Francisco bungalow is illuminated entirely with LED lighting, and uses all UL listed LED components and meets all Title 24 and California building codes. Everything in this bungalow is powered by 12 Volt DC power, using less than 400 watts at 12 volt.

Inspired?

Let us build an LED system for you.

Contact Us