Shine On LED
Custom LEDs designed and delivered.

Wavewall Experience

The Project

This massive dynamic RGB LED 4 foot by 8 foot wavewall was custom designed by Shine On LED to deliver a truly unique LED experience. Rigid LED boards were designed to be offset from the shape of the winding wave-like wall. This bending 'wave-shaped' RGB LED wall is fully programmable and diffused with a molded 3-form screen. Each LED has a separate IP address so the wall can breath LED light up, down, backwards, forwards in any combination imaginable. The client and Shine On LED developed 12 unique light shows that can be operated with the Traxon Glass Touch T12.

How It Works

The Glass Touch T12 has 12 buttons and on/off via touch-sensitive zones on the unit, which are located behind a smooth glass surface. The touch-sensitive areas allow sophisticated control of the assigned LED light shows for standalone application. In standalone mode, without a server, this LED system can replay and loop previously uploaded lighting shows programmed with the e:cue Lighting Application Suite. It can be controlled using a custom graphical user interface in conjunction with a web browser or via free apps designed for iOS and Android devices over a wireless connection. In standalone mode this system controls up to 1024 DMX512 channels (2 universes) and plays up to eight cuelists in parallel.

LED Parts List

LocationLED Parts Detail
Family TV RoomTraxon Glass Touch T6R wall controller
(16 pieces) 64-pixel RGB boards
(34 pieces) 4-pixel RGB boards
(24 pieces) 12-pixel RGB boards
(4) 150 Watt, 24 Volt LED Power supplies
(2) Butler XTs

Power Used For LEDs

LocationLED Parts Detail
Family TV Room(4) 150 Watt, 24 Volt LED Power supplies
Posted on

April 8, 2014


  • Custom fixture design, development & fabrication
  • Custom diffused white 3M plastic for LEDs
  • Custom wiring and installation
  • Custom LED light shows using the Traxon / e:cue Lighting Application Suite


Let's talk