Shine On LED
Custom LEDs designed and delivered.
Code and Canvas

Code and Canvas

This art studio and workspace is lit by 12 LED downlights and custom bench lighting in the general studio, 3 spotlights in the DJ booth, and 12 sconces in the mezzanine gallery.

Levi’s

Levi’s

We provide Levi’s corporate headquarters in San Francisco with a variety of pure white and warm white custom LED retail fixtures, including display pyramids with LED bars and custom designed freestanding light boxes. All of these custom fixtures are complete with power supplies and dimmers.

Hyde Street Loft #2

Hyde Street Loft #2

This San Francisco loft has 24 volt LEDs installed behind the ceiling support girders, with Lutron Homeworks lighting controls for custom dimming. The kitchen installation is wired with two lighting options, allowing the fixture to be switched between warm white Cree spotlights, pure white LED bars, or both at once. All of these LEDs can also be dimmed with a Lutron control. All rigid bar LEDs used have 18 LEDs per linear foot.

Vortex

Vortex

This elegant San Francisco loft is outfitted with custom designed extrusions and diffusers and 24 volt LEDs. Lutron Homeworks lighting controls are used throughout the installation. Lighting in each room can be dimmed with a separate Lutron switch. All rigid bar LEDs used have 24 LEDs per linear foot. 

Google Winter Wonderlab

Google Winter Wonderlab

This installation includes a digital light show with dynamic custom color shifting, controlled by the Traxon Light-Drive Elite controller. Merchandise counters are custom designed and lighted with dimmable pure white LEDs. White LEDs for merchandise counters have 24 LEDs per linear foot, while the RGB bars have 18.

Pizzeria Delfina

Pizzeria Delfina

This installation includes warm white LED lighting over the bar and under the counters. The system is complete with power supplies and dimmers for all lighting, and the warm white LED bars have 18 LEDs per linear foot. 

Greenwich Residence

Greenwich Residence

This Greenwich Street residence is illuminated with RGB LEDS on each of its four floors, elevator, garage, man cave, master bedroom, office, and fourth floor deck and hot tub area. The fourth floor is elegantly lit with 24 Volt RGB digital LEDs, custom made by Shine On LED. With a grand view of the Golden Gate Bridge, the RGB LEDs can match the mood or slowly fade between 16,000 colors.

LED Spiral Chandelier

LED Spiral Chandelier

Working directly with Kyle Minor Design, Shine On LED designed, modeled, rendered and installed LED lighting into this LED spiral aluminum frame with wood veneer. The chandelier has over 135 feet of Warm and Pure White LEDs mounted on the inside and controlled with a Lutron wall dimmer.

The 10 foot by 12 foot chandelier was modeled in 3D and cut with a water-jet machine. All the parts were welded together and designed to come apart for transportation. Wood veneer was used to wrap the entire piece and to provide a warm glow from the LEDs on the inside.

Farina Pizza

Farina Pizza

The Farina Pizza project consisted of 10 custom blown glass tubes and custom inner LED diffusion illuminated with custom RGB LEDs. The structure to support the glass, diffusion and LEDs were designed and built in 3D and cut with a water jet machine.

The restaurant wine rack, server station, cook station, drink station, washroom area, and carry-out area were also illuminated with custom Warm White LEDs from Shine On LED.

LED RGB Lightboxes

LED RGB Lightboxes

Depending on the job, Shine On LED can create custom LED RGB configurations based on the area you need to illuminate. Shine On LED developed Light Platforms, a modular, internally RGB-illuminated platform for highlighting retail products. Each configuration is different and customized to your specific liking.

Color-changing LED light platforms have individual power feeds powered by 12 volts. The LED light platforms are 23-3/4 inch square white acrylic in two heights: 9-inch and 12-inch, but any size is available. They can support up to 75 pounds. A pushbutton footswitch is also included.

Laconda Oyster Bar

Laconda Oyster Bar

The Laconda project made use of warm white 12 Volt LEDs throughout the entire restaurant space. Shine On LED installed white Linear LED under the main front bar, server station, cook station and seating area. The LEDs are exclusive Shine On LED products, spaced at 18 spots per foot, the highest concentration of LEDs per foot given the circuit board size. All the components used are UL Listed, low voltage and meet all California building codes.

Aluminum LED Light

Aluminum LED Light

LED lighting! It’s a great addition to the Scissy products designed and manufactured by B&N. The B&N retail fixture systems called for a single spotlight LED lighting accessory. Shine On LED designed and rendered several concepts, and delivered the files to Hoffman Metal Products to be milled in aluminum.

Linear Kitchen LED Lights

Linear Kitchen LED Lights

Working directly with Kyle Minor Design, Shine On LED designed, modeled, and rendered this 16.5 foot LED fixture and provided all the necessary LED components. The lights illuminate the kitchen area with warm LED light mounted on the inside corners of the fixture and are controlled with a Lutron wall dimmer.

The fixture was modeled in 3D and cut with a water-jet machine. The side surfaces were made of custom cut 3FORM from samples picked by our client. The 3FORM gives color and a warm glow to the space.

Parklet at California & Fillmore

Parklet at California & Fillmore

Together with architectural design studio Siol, Shine On LED developed a custom water-resistant LED solution to illuminate this parklet located on the corner of California and Fillmore in San Francisco. The RGB LEDs sit in a ‘reveal’ at the lip of the seat pan to follow the unique contour the architect defined.

LED Wine Rose Rack

LED Wine Rose Rack

Working directly with Kyle Minor Design, Shine On LED provided the LEDs, plug-in power supply and installation.

Shine On LED has LEDs available in many shades of white. A warm rose LED color was what the client called for and clearly helps show off the wine bottles, wood grain and color with zero UV light.

Each of the LED strips are mounted to the back aluminum structure with 3M LED heat dissipation tape. A 60 watt DC lug-in type power supply is used to power the LED system and has a pushbutton on/off switch. The Warm White LEDs are attached to the back of the aluminum inner structure. facing backwards and reflecting the warm LED.

Marina Residence

Marina Residence

This San Francisco ‘Green’ home is illuminated with LED lighting using all UL listed LED components. Powered by 12 and 24 Volt DC power, this house has LEDs in the kitchens, bathrooms, under cabinets, garage, closets and outdoors.

Wavewall Experience

Wavewall Experience

This massive dynamic RGB LED 4 foot by 8 foot wavewall was custom designed by Shine On LED to deliver a truly unique LED experience. Rigid LED boards were designed to be offset from the shape of the winding wave-like wall.

This bending ‘wave-shaped’ RGB LED wall is fully programmable and diffused with a molded 3-form screen. Each LED has a separate IP address so the wall can breath LED light up, down, backwards, forwards in any combination imaginable. The client and Shine On LED developed 12 unique light shows that can be operated with the Traxon Glass Touch T12.

Chakra RGB Wall

Chakra RGB Wall

This colorful, dynamic 3 by 3 foot meditation wall was custom designed by Shine On LED and Marilynne Moreshead to deliver a truly unique experience. Rigid RGB LED boards were designed to be opened to slide in artwork, and so the light would shine through the translucent material for a special glow.

This installation is fully programmable and can be adjusted from the wall unit or by plugging in your laptop. Each LED has a separate IP address so the wall can breathe LED light up, down, backwards, and forwards in any combination imaginable. The client and Shine On LED developed eight unique light shows that can be updated with Easy Stand Alone (ESA) software.

Sorbetti LED Light Platforms

Sorbetti LED Light Platforms

LED lighting! It’s linear and a great addition to the Sorbetti pole-based systems designed and manufactured by B&N. The Sorbetti systems called for a linear LED lighting accessory. Shine On LED designed and rendered a concept that attaches to the Sorbetti uprights to glow any color the client desires.